Home › Shop › Pigtails › EV6 / EV14
Fuel Injector Connector Pigtails — EV6 / EV14 (USCAR)
USCAR female socket plugs, pre-wired on 16 AWG 2-wire leads, 4.25 in (10.8 cm) long, heat resistant to 257°F (125°C) — the standard repair lead for cracked or heat-brittle EV6 and EV14 injector plugs. In stock — ships in 1–2 business days.
USCAR connector pigtail — 4.25 in leads
Choose your pack
Free US shipping · 30-day returns · Secure checkout by Stripe
What's included
Your chosen pack of USCAR pigtail leads. Each lead is a female socket plug pre-wired on 16 AWG 2-conductor wire, 4.25 in (10.8 cm) long — cut off the damaged plug, splice or solder the lead into your harness, and plug in.
Fitment & compatibility
Fits fuel injectors with the USCAR connector — the compact, nearly square plug with a molded press-down plastic latch, used on EV6 and EV14 injectors. Replaces connector part numbers 5013995AA, 5161919AA, 88988313, 89046636, 89046836, 89046838, S824, 15306318, 1U2Z14S411ANA, 1U2Z14S411BPA, 1P1344, PT2160. This plug does not fit the older EV1 (Jetronic / Minitimer) injectors — if your plug is a wide rectangle held by a separate wire clip, use the EV1 pigtails instead. How to tell them apart: EV1 vs EV6 connectors.
Shipping & returns
In stock — ships in 1–2 business days with free US shipping. 30-day returns: send it back unused within 30 days for a full refund.
How to splice in a pigtail
1. Cut the old plug
Cut the harness wires behind the damaged plug, staggering the two cuts so the splices don't sit side by side.
2. Join the lead
Match the two wires, then solder or crimp each joint and seal it with heat-shrink — the joint lives in engine-bay heat and vibration.
3. Plug in
Push the plug onto the injector until the molded latch clicks.
Related
Why buy from Partsapiens
Specialist focus
Fuel-injector service parts are all we sell — connectors, seals, filters, clips and the tools to fit them.
Secure checkout
Payments are processed by Stripe over HTTPS. We never see or store your card number.
Fitment help
Not sure which plug you have? Send a photo of your injector connector and we will confirm before you buy.