Partsapiens
Features Instructions FAQ

Injector Micro‑Filter Removal Tool

The injector-service puller in the Partsapiens catalog: a self-threading tip draws spent ~6 mm basket filters out of top-feed injectors — EV1 and EV6 designs, plus EV14 units whose basket can be serviced. Screw the tip into the worn filter, turn, and lift the filter clear; nothing gets drilled, pried at or picked. Order it on its own, or bundled with 4, 8, 12, 24 or 50 fresh micro basket filters.

Made in USA.

Also listed on Amazon: the tool bundled with 8 filters carries 4.7★ across 60 ratings · the 12-filter bundle carries 4.3★ across 16 ratings

Self-threading tip Fits ~6 mm basket filters Reusable
US shipping only for now • 30‑day returns • Secure checkout
Product main
Retaining Clips
Quick-lock stainless clips for Bosch/USCAR styles.
Secure fitment clips for Bosch/USCAR injectors.
Compatible with common Bosch/USCAR injector bodies.
Repair Kits
Complete refresh sets: O‑rings, filters, caps & seals.
Complete sets with o‑rings, filters, and seals.
Each kit includes O‑rings, micro‑filters, and pintle caps/seals.

Why mechanics choose our tool

No drilling or prying
The tip threads into the old filter so it pulls straight out instead of being dug out with picks.
Seats the new filter too
Flip the tool and use the flat press-end to push the new basket in squarely.
One tool, many injectors
Reusable: one tool services many injectors. Made in the USA.

Instructions

Before you start

  1. Wear eye protection and gloves, and work away from sparks or flame.
  2. Remove the injector and take off the top (fuel-rail) O-ring — the old basket filter sits in the inlet underneath.
  3. Check that your injector has a serviceable ~6 mm basket filter (some EV14s don't).

Removing the old filter

  1. Put the self-threading tip into the centre of the old basket filter.
  2. Turn the tool so the thread bites into the filter screen.
  3. Twist and pull straight out along the injector axis; discard the old filter.

Fitting the new filter

  1. Place a new micro basket filter squarely in the inlet.
  2. Use the tool's flat press-end to push it fully home without crushing it.
  3. Fit a new FKM O-ring of the matching size and reinstall the injector.

FAQ

Will this tool damage injector nozzles?
It is designed to avoid that: the tip threads into the filter screen rather than the injector body, and the filter is pulled straight out with no drilling or prying. Work gently and keep the tool in line with the injector.
Which filters fit?
Any top-feed injector fitted with a ~6 mm micro basket filter: EV1 and EV6 designs, plus EV14 units whose basket can be serviced. A few EV14 filters are fixed and cannot come out, and the tool is not made for side-feed or bottom-feed injectors. Check your injector before ordering.
Do you ship internationally?
Not right now. US shipping only for now; international orders are temporarily unavailable.
© Partsapiens • Secure checkout via Stripe
⬆ Back to top